Yes, holograms can be counterfeited. A colour printer, scanner or camera cannot reproduce one, but a hologram can be replicated mechanically from an original, imitated with a look-alike, or moved from a genuine pack to another. The bigger weakness is often not technical at all: consumers and dealers do not know what the genuine hologram should look like, so a similar shiny label is enough to satisfy them.
Where is a hologram genuinely strong?
The EUIPO technology guide describes security holograms as diffractive optical devices whose image changes with lighting and viewing angle, and states that they cannot be reproduced by colour printers, scanners or cameras. A counterfeiter who simply scans and reprints your pack will not get the hologram that way. This is a real barrier, and one reason holograms became so common on packaging.
But the barrier only applies to ordinary copying. Researchers at Kaunas University of Technology point out that a recorded hologram can be reproduced by pressing it into another material, which is the same property that makes mass production of holograms possible, and they warn that holograms can themselves be counterfeited.
How do holograms get counterfeited?
| Route | How it is done | What it takes | Who can notice |
|---|---|---|---|
| Mechanical replication | The structure of a genuine hologram is transferred to another material | Equipment and an original | An expert with a reference |
| Look-alike | A similar hologram is originated rather than an exact copy | Access to a hologram producer | Someone comparing against a reference |
| Leaked genuine label | Surplus production or stock leaves the books | A gap in the supply chain | Not a label check, only a count |
| Reuse | A genuine label is removed from a used pack and applied to another product | A label that peels off cleanly | A checker, if it shows tamper evidence |
There is an example from Türkiye. Reporting on a 2018 investigation into fake pesticides across eight provinces describes suspects organised to produce everything at high volume, from packaging, labels and holograms to the contents. For an operation of that scale, a hologram did not count as an insurmountable hurdle.
Why is the checker a bigger problem than the technology?
The EUIPO guide spells out the key condition: authenticating a hologram requires knowledge of the original, because a difference between two holograms only shows up in comparison. It adds that each change or update needs to be considered. In practice that has three consequences:
- The reference is not in the field. Consumers have nothing to compare against, and dealers and field teams often do not either.
- What is visible can be learned. The advantage of an overt feature is that everyone sees it. So does the counterfeiter deciding what to imitate.
- A visual check leaves no trace. It produces no record, so the brand never learns how many suspect labels appeared in which region.
The 2022 threat assessment by Europol and EUIPO makes a related general point: counterfeit packaging is in many cases indistinguishable from the genuine product, so some infringements go unnoticed.
None of this makes holograms worthless. They are visible on the shelf, signal that a product is protected and rule out casual copying. We compared how they affect the packaging process in packaging security features. The point is to drop the assumption that a hologram alone proves authenticity.
What should you ask when specifying a hologram?
- Who compares it, and against what? Write a separate answer for quality staff, dealers and consumers. If dealers will check, who holds the reference sample or card?
- Who holds the master? The contract should cover rights to the master and tooling, and where they are kept after the job.
- How is stock counted? Labels produced, delivered, spoiled and destroyed should be reported for each job. We apply the same logic to printer overruns.
- What happens when it is peeled off? If reuse is a risk, the label should leave a mark or break up on removal.
- What happens when the design changes? Old and new holograms will share the market for a while. How will checkers know which versions are valid?
- Where does the record live? If visual checks are to be reported, that needs a channel of its own.
What can a hologram be combined with?
Layers are commonly combined because each answers a different question:
| Question | Hologram | Tamper evidence | Measurable invisible layer |
|---|---|---|---|
| Deterrent on the shelf? | Yes | Partly | No |
| Has the pack been opened? | No | Yes | No |
| Tool needed? | A reference | No | Phone and app |
| Is the result recorded? | No | No | Yes |
We explain how invisible layers work and how they behave against copying in digital watermarks on packaging.
Where does Grafex sit alongside a hologram?
Grafex's invisible signature needs no additional label; it sits inside the existing packaging design and is printed on the existing line. It does not have to replace a hologram: the hologram stays visible on the shelf while the signature is read with a smartphone and the result is recorded with date and location. Because the signature is generated from a brand-specific key, packaging that does not carry it, or does not match the key, does not get a genuine result at verification. The scope is on the solutions page.
Sources
- EUIPO, Anti-counterfeiting and anti-piracy technology guide: Security Holograms
- Kaunas University of Technology, Combating counterfeiting: advanced hologram protection (19 March 2024)
- TRT Haber, report on the fake pesticide operation (24 November 2018, in Turkish)
- Europol and EUIPO, Intellectual Property Crime Threat Assessment 2022


